RDS Operations
English
Auto store function for TPSelecting PTY
stations1. Press the [MODE] button.
You can automatically store up to 6 TP stations2. Touch [PTY SELECT].
to preset memory. If the number of TPs that can
3. Touch on the right of the display to
be received is less than 6, broadcast stations
already stored in memory are left without beingselect PTY.
overwritten. Below are the factory default settings
stored:
1. Make sure that OTA� is displayed.
If OTA� is not displayed, press the [TA] buttonPresetPTY item
to display OTA�.number ENGLISHContents
2. Touch and hold [PS/AS] for 2 seconds orP1NewsNews
longer.P2InfoInformation
OA-STORE� is displayed and the preset No.P3Pop MPop Music
in the auto-store operation appears on theP4SportSport
preset No. display.P5ClassicsSerious Classical Music
Y TP stations with good reception sensitivity areP6Easy MEasy Listening Music
stored to preset memory.
Y Even if you select FM1 or FM2, a TP station is
stored to memory for FM3.4. The PTY select mode is cancelled
automatically 7 seconds after, or touch
[RTN].
PTY
This function enables you to listen to a
PTY seek
broadcast of the selected programme type even
if this unit is in a function mode other than radio.
1. Press the [MODE] button.
Y The factory default setting is OOFF�.
2. Touch [PTY SELECT].
Y Some countries do not yet have PTY
broadcast.3. Either touch on the right of the
Y In the TA standby mode, a TP station hasdisplay, or touch [PTY-]/[PTY+] to select
priority over a PTY broadcast station.PTY.
4. Touch on the left of the display.
 To set the PTY standby mode
When is touched, this unit seeks a PTY
1. Press the [MODE] button.broadcast moving up the frequencies, while
when is touched it seeks moving down
2. Touch [PTY].
the frequencies.
OPTY� lights in the display and the PTY
If no station with the selected PTY
standby mode is turned on.
broadcast can be received, this unitWhen the selected PTY broadcast starts,
returns to the previous mode.
the PTY item name appears in the display.
 To cancel the PTY standby mode
1. Press the [MODE] button.
2. Touch [PTY].
OPTY� goes off in the display and the PTY
standby mode is cancelled.
 To cancel a PTY interrupt broadcast
Press the [TA] button during the PTY interrupt
broadcast. The PTY interrupt broadcast is
cancelled and this unit returns to the PTY
standby mode.
DXZ868RMP21
280-8337-00 |